IICL Publications and Tools

We're sorry, but to function, this form requires javascript be enabled.

Use the tabs below to select products form the categories listed. When done selecting products, click the checkout tab and complete the form.

Repair Manual for Steel Freight Containers, 5th Ed.

Product Code: 1105
Price: $50.00
Weight: 13 ozs

Detail Description:

Repair Manual for Steel Freight Containers, 5th Edition Contains recommendations for repair of steel containers, many presented by means of color photographs. Covers general repair principles and procedures, repair of individual container components, safety precautions, materials and tools, non-conforming and improper repairs, terminology and interpretation of ISO dimensions.

(170 pages)

Qty: Total:

Supp. on Inspection & Repair: Gray Areas, 2nd ed.

Product Code: 1106
Price: $25.00
Weight: 5 ozs

Detail Description:

Supplement on Inspection & Repair: Gray Areas, 2nd edition Clarifies "gray areas" in container inspection and repair that have remained open to interpretation and thus the source of disputes. Such areas include conditions where it is unclear whether repair is required or not; wear and tear vs. damage; improper repairs; and others. Color photos illustrate conditions such as improper panel straightening, floor delamination and rolling shear failure.

(24 pages)

Qty: Total:

General Guide for Container Cleaning, 2nd Ed.

Product Code: 1117
Price: $25.00
Weight: 9 ozs

Detail Description:

General Guide for Container Cleaning, 2nd Edition This Guide uses color photographs to illustrate different types of container conditions in dry van, open top and refrigerated containers that may or may not require cleaning. For each condition, the Guide recommends the action to be taken, if any, and the cleaning procedure to use, if the container requires cleaning. Areas covered include general principles for determining when to clean, possible harmful contamination and recommended action, and recommended cleaning methods for all types of conditions.

(94 pages)

Qty: Total:

Guide for Flatrack Container Inspection

Product Code: 1120
Price: $40.00
Weight: 8 ozs

Detail Description:

Guide for Flatrack Container Inspection.

(90 pages)

Qty: Total:

Guide for Flatrack Container Repair

Product Code: 1121
Price: $45.00
Weight: 9 ozs

Detail Description:

Guide for Flatrack Container Repair.

(106 pages)

Qty: Total:

Guide for Container Equip. Inspection, 6th Ed.

Product Code: 1122
Price: $50.00
Weight: 10 ozs

Detail Description:

Provides criteria for determining if damage to containers requires repair. Includes updates and harmonization of several inspection criteria and processes that have developed over recent years. Benefits of the IICL 6 standard also include simplification and efficiency improvement of procedures for container inspections performed at container depots around the world.

(Published 2016)

Qty: Total:

Guide for Open Top Container Equipment Inspection

Product Code: 1125
Price: $50.00
Weight: 13 ozs

Detail Description:

Guide for Open Top Container Equipment Inspection (180 pages) Addresses in detail the inspection of components and cleaning decisions specific to open top containers.

(180 pages)

Qty: Total:

Full Set of Container Publications

Product Code: 1198
Price: $195.00
Weight: 58 ozs

Detail Description:

The Full Set of Container Publications include the following manuals:
(1105) Repair Manual for Steel Freight Containers,
(1106) Supplement to Inspection and Repair; Gray Areas, 2nd Edition
(1117) General Guide for Container Cleaning, 2nd Ed.,
(1122) Guide for Container Equipment Inspection, 6th Ed.,
(1125) Guide for Open Top Container Equipment Inspection,
The International Convention for Safe Containers Manual, 1972 (CSC).

A CSC Manual is included in the packet, and is available in English, Spanish and French

Please choose desired language for CSC manual:

English:
Spanish:
French:
* The only manual in the package in English, Spanish or French is the CSC manual, all other publications are in English only.
Qty: Total:

Guide for Floorboard Quality Assurance Program

Product Code: 2100
Price: $45.00
Weight: 6 ozs

Detail Description:

Guide for Floorboard Quality Assurance Program The Floorboard manual is a comprehensive check list of criteria used for the auditing of plywood construction. The manual can be used by an auditor, factory or inspector to review the step by step details. The manual also assigns an audit score to rate the process.

(46 pages)

Qty: Total:

Container Chassis Inspection & Maintenance, 4th Ed.

Product Code: 2105
Price: $60.00
Weight: 13 ozs

Detail Description:

Guide for Container Chassis Inspection and Maintenance, 4th Edition. Contains Inspection and Maintenance criteria recommendations for container chassis.

(179 pages)

Qty: Total:

General Guide for Refrigerated Container Inspection & Repair, 4th Ed

Product Code: 3101
Price: $65.00
Weight: 14 ozs

Detail Description:

General Guide for Refrigerated Container Inspection and Repair, 4th Edition Contains inspection criteria and repair recommendations for reefer containers.

(235 pages)

Qty: Total:

International Convention for Safe Containers, 1972 (CSC)

Product Code: 3200
Price: $21.00
Weight: 16 ozs

Detail Description:

The International Convention for Safe Containers, 1972 (CSC 1972) has two goals:

  • to maintain a high level of safety of human life in the transport and handling of containers by providing acceptable test procedures and related strength requirements; and
  • to provide uniform international safety regulations, equally applicable to all modes of surface transport, thereby avoiding the proliferation of divergent national regulations.
The amendments to CSC 1972 adopted by resolution MSC.355(92) entered into force on 1 July 2014 and include:
  • new definitions at the beginning of annexes I and II, along with consequential amendments to ensure uniform usage of terminology throughout CSC 1972; - amendments to align all physical dimensions and units to the SI system;
  • the introduction of a transitional period for marking containers with restricted stacking capacity, as required under the relevant standard; and
  • the inclusion in annex III of the list of deficiencies which do not require an immediate out-of-service decision by the control officer but do require additional safety measures to enable safe ongoing transport.
(2014 Edition)

If you wish to purchase the digital version of this manual please click here
.

Qty: Total:

Convenio Internacional Sobre La Seguridad De Los Contenedores, 1972 (CSC)

Product Code: 3300
Price: $21.00
Weight: 16 ozs

Detail Description:

The International Convention for Safe Containers, 1972 (CSC 1972) has two goals:

  • to maintain a high level of safety of human life in the transport and handling of containers by providing acceptable test procedures and related strength requirements; and
  • to provide uniform international safety regulations, equally applicable to all modes of surface transport, thereby avoiding the proliferation of divergent national regulations.
The amendments to CSC 1972 adopted by resolution MSC.355(92) entered into force on 1 July 2014 and include:
  • new definitions at the beginning of annexes I and II, along with consequential amendments to ensure uniform usage of terminology throughout CSC 1972; - amendments to align all physical dimensions and units to the SI system;
  • the introduction of a transitional period for marking containers with restricted stacking capacity, as required under the relevant standard; and
  • the inclusion in annex III of the list of deficiencies which do not require an immediate out-of-service decision by the control officer but do require additional safety measures to enable safe ongoing transport.
(Edición de 2014)

If you wish to purchase the digital version of this manual please click here
.

Qty: Total:

Convention Internationale De 1972, Sur La Sécurite Des Conteneurs (CSC)

Product Code: 3400
Price: $21.00
Weight: 16 ozs

Detail Description:

The International Convention for Safe Containers, 1972 (CSC 1972) has two goals:

  • to maintain a high level of safety of human life in the transport and handling of containers by providing acceptable test procedures and related strength requirements; and
  • to provide uniform international safety regulations, equally applicable to all modes of surface transport, thereby avoiding the proliferation of divergent national regulations.
The amendments to CSC 1972 adopted by resolution MSC.355(92) entered into force on 1 July 2014 and include:
  • new definitions at the beginning of annexes I and II, along with consequential amendments to ensure uniform usage of terminology throughout CSC 1972; - amendments to align all physical dimensions and units to the SI system;
  • the introduction of a transitional period for marking containers with restricted stacking capacity, as required under the relevant standard; and
  • the inclusion in annex III of the list of deficiencies which do not require an immediate out-of-service decision by the control officer but do require additional safety measures to enable safe ongoing transport.
(Édition de 2014)

If you wish to purchase the digital version of this manual please click here
.

Qty: Total:

Chipping Hammer

Product Code: 4205
Price: $56.00
Weight: 10 ozs

Detail Description:

Used to clean heavily corroded surfaces and to allow proper visual inspection. The sound produced by the point head when hitting metal or the flat head on floorboards assists inspectors to determine need for repair.

Qty: Total:

New Roof Measuring Kit

Product Code: 4206
Price: $85.00
Weight: 16 ozs

Detail Description:

Extendable arms allow roof panel measurements eliminating the need for ladders. Ruler has notches at 2 mm and 10 mm position.

Qty: Total:

New Reference Line

Product Code: 4207
Price: $56.00
Weight: 16 ozs

Detail Description:

With extension arm to facilitate the positioning of the upper magnet at high locations. Stronger line is now protected from abrasion between magnet and steel surface.

Qty: Total:

New Reefer Measuring Magnet

Product Code: 4208
Price: $52.00
Weight: 8 ozs

Detail Description:

To measure side panels out-of-ISO. The set includes a pair of magnets and a reeling chalk line (100 ft). Magnets have groves 20 mm high to be used on corner fittings and 24 mm high to be used on undamaged corner post side walls.

Qty: Total:

New Spacers

Product Code: 4209
Price: $18.00
Weight: 8 ozs

Detail Description:

For out-of-ISO measurements. Spacers are 5mm thick. The set includes 4 x 5 mm magnets.

Qty: Total:

New Damage Measurement Rulers

Product Code: 4210
Price: $28.00
Weight: 6 ozs

Detail Description:

Rulers now have acid etched darker markings to facilitate reading.

Qty: Total:

Reference Line + Ruler

Product Code: 4110
Price: $79.00
Weight: 16 ozs

Detail Description:

Reference Line + Ruler

Qty: Total:

Reference Line + Ruler + Chipping Hammer

Product Code: 4120
Price: $130.00
Weight: 30 ozs

Detail Description:

Reference Line + Ruler + Chipping Hammer

Qty: Total:

Reference Line + Ruler + Chipping Hammer + Set of 4 x 5 mm Spacers

Product Code: 4130
Price: $145.00
Weight: 40 ozs

Detail Description:

Reference Line + Ruler + Chipping Hammer + Set of 4 x 5 mm Spacers

Qty: Total:

Reference Line + Ruler + Chipping Hammer + Set of 4 x 5 mm Spacers + Roof Measuring Kit

Product Code: 4140
Price: $221.00
Weight: 48 ozs

Detail Description:

Reference Line + Ruler + Chipping Hammer + Set of 4 x 5 mm Spacers + Roof Measuring Kit

Qty: Total:

Reference Line + Ruler + Chipping Hammer + Set of 4 x 5 mm Spacers + Roof Measuring Kit + Set of Reefer Magnets

Product Code: 4150
Price: $266.00
Weight: 56 ozs

Detail Description:

Reference Line + Ruler + Chipping Hammer + Set of 4 x 5 mm Spacers + Roof Measuring Kit + Set of Reefer Magnets

Qty: Total:

Basket Contents

delete Name Quantity Price Line Total
Total Due

Shipping Address

Street address required as UPS will not deliver to PO Box numbers.
For addresses within the United States, use drop down to indicate the state.
Enter 0 if no postal code.
Country code - City/Area code - Telephone number
For US, US Territories, and Canada the country code is 1.
Leasing Company
Ship Line
Depot/Repair Company
Surveying Company
Other (specify)

Shipping Charges

Delivery Service:
We'll automatically calculate your shipping charges using UPS Ground service in the U.S., or UPS Worldwide Express, Expedited or Standard elsewhere. You may choose UPS Next Day Air for Domestic service if you wish. Orders placed after 3:00 pm may ship out on the following business day.

You are responsible for paying all duties and taxes fee's (if any) charged by your countries customs agency or
government for the delivery of your publications and/or tools.


Pay by Other Method
Credit Card

Billing same as Shipping?
Please note: No returns, All Sales are Final.

 

 

You'll only be able to submit the form once shipping has been calculated.
submitform